| No. | Brand | F | L | G | H | w | M | b | s |
| AA-4000-3 | ISOSTATIC | - | - | - | - | - | - | - | - |
| CB-3844-40 | ISOSTATIC | - | - | - | - | - | - | - | - |
| CB-0305-08 | ISOSTATIC | - | - | - | - | - | - | - | - |
| EP-081232 | ISOSTATIC | - | - | - | - | - | - | - | - |
| AM-3645-36 | ISOSTATIC | - | - | - | - | - | - | - | - |
| AA-1803-13 | ISOSTATIC | - | - | - | - | - | - | - | - |
| CB-2430-36 | ISOSTATIC | - | - | - | - | - | - | - | - |
| FF-710 | ISOSTATIC | - | - | - | - | - | - | - | - |
| AA-1213-12 | ISOSTATIC | - | - | - | - | - | - | - | - |
| CB-1626-24 | ISOSTATIC | - | - | - | 305.594 mm | - | - | - | - |
| SS-6476-40 | ISOSTATIC | 44 mm | - | - | - | - | - | mm | 1.6 mm |
| FF-805-3 | ISOSTATIC | - | - | - | - | - | - | - | - |
| B-1622-10 | ISOSTATIC | - | - | - | - | - | - | - | - |
| SS-3248-28 | ISOSTATIC | - | - | - | - | - | - | - | - |
| EP-161820 | ISOSTATIC | - | 162 mm | - | - | - | - | - | - |
| AM-4556-28 | ISOSTATIC | - | 558.8 mm | - | 338.137 mm | - | - | - | - |
| CB-2834-44 | ISOSTATIC | - | - | - | - | - | - | - | - |
| EP-050816 | ISOSTATIC | - | - | - | - | - | - | - | - |
| B-58-7 | ISOSTATIC | - | - | - | - | - | - | - | - |
| CB-0816-16 | ISOSTATIC | - | - | 169.139 mm | - | - | - | - | - |
| CB-4858-64 | ISOSTATIC | - | - | 119.786 mm | - | - | - | - | - |
| B-810-7 | ISOSTATIC | - | - | - | - | - | - | - | - |
| AA-403 | ISOSTATIC | 45 mm | - | - | - | - | - | - | - |
| FB-1418-10 | ISOSTATIC | - | - | - | - | - | - | - | - |
| FM-1418-22 | ISOSTATIC | - | - | - | - | - | - | - | - |
| EP-081324 | ISOSTATIC | - | - | - | - | - | - | - | - |
| B-1218-6 | ISOSTATIC | 385 mm | - | - | - | - | - | - | - |
| EP-192432 | ISOSTATIC | - | - | - | - | - | - | - | - |
| FB-46-4 | ISOSTATIC | - | - | - | - | - | - | - | - |
| ISOSTATIC CB-1420-14 Sleeve Bearings | D:225.0000 mm; Fillet Radius ra:3.00 mm; Fillet Radius rb:1.00 mm; B:54.00 mm; Basic Static Radial Load Rating Co:236000 N; d:90.000 mm; Oil Speed Rating n2:3600 rpm; Basic Dynamic Radial Load Rating C:212000 N; Grease Speed Rating n1:3000 rpm; |
| ISOSTATIC FB-1418-10 Sleeve Bearings | Ca min.:3 mm; Fatigue load limit Pu:5.6 kN; Calculation factor Y0:0.9; Da min.:66 mm; Mass bearing:0.19 kg; r3,4 min.:1 mm; d1 ≈:62.2 mm; rb max.:1 mm; ra max.:1 mm; d:50 mm; |
| ISOSTATIC SS-4856-20 Sleeve Bearings | d:35.000 mm; B:38.10 mm; Accessories:One Seal; D:80.0000 mm; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:7500 rpm; Grease Speed Rating n1:5600 rpm; Basic Dynamic Radial Load Rating C:52300 N; Basic Static Radial Load Rating Co:48000 N; Sealed Speed Rating n3:5600 rpm; |
| ISOSTATIC EF-101412 Sleeve Bearings | Fillet Radius ra:1.50 mm; Oil Speed Rating n2:6600 rpm; B:50.00 mm; Basic Dynamic Radial Load Rating C:85200 N; Grease Speed Rating n1:5100 rpm; Basic Static Radial Load Rating Co:75000 N; Fillet Radius rb:1.00 mm; d:45.000 mm; D:100.0000 mm; |
| ISOSTATIC EP-081612 Sleeve Bearings | with tapered bore:1205 ; B1:mm; d:25 mm; Static (Cor):12.460 kN; D:52 mm; rs Dynamic (Cr):1 mm; Pu:3.350 kN; Oil:12 600 min-1; with cylindrical bore:15 000 min-1; Grease:0.150 kN; |
| ISOSTATIC CB-3844-40 Sleeve Bearings | Fatigue load limit Pu:0.011 kN; D1 ≈:8.2 mm; Limiting speed:80000 r/min; D:10 mm; d:4 mm; Calculation factor kr:0.02; Basic static load rating C0:0.245 kN; ra max.:0.2 mm; d1 ≈:5.9 mm; da min.:5.6 mm; |
| ISOSTATIC EF-141616 Sleeve Bearings | Basic Dynamic Radial Load Rating C:85200 N; Accessories:Two Seals; Fillet Radius ra:2.00 mm; B:28.00 mm; Sealed Speed Rating n3:2200 rpm; Oil Speed Rating Open/Shielded n2:4000 rpm; d:120.000 mm; D:180.0000 mm; Basic Static Radial Load Rating Co:80000 N; Grease Speed Rating Open/Shielded n1:3400 rpm; |
| ISOSTATIC AM-4556-28 Sleeve Bearings | Max. speed for PosiTrac Plus seal:1050 r/min; A2:225.425 mm; A1:158.75 mm; H:338.137 mm; PG:1/4 NPT; Adapter sleeve assembly:SNW 32x5.1/2; Bearing:22232 CCK/W33; Cap bolt recommended tightening torque:813.5 N·m; H1:169.875 mm; L:558.8 mm; |
| ISOSTATIC EP-071024 Sleeve Bearings | da:65 min; Grease:3 300 min-1; Da:110 max; d:55 ; Oil:4 000 min-1; Static (Cor):108.000 kN; rs (min):2 mm; ra:2 max; D:120 mm; Dynamic (Cr):110.379 kN; |
| ISOSTATIC EP-050816 Sleeve Bearings | D:72 mm; B:50 mm; Tolerance shaft:h8; Tolerance housing:H7; d:60 mm; Coefficient of friction µ min.:0.05; Specific static load factor K0:20 N/mm²; B1:6 mm; Specific dynamic load factor K:10 N/mm²; Permissible sliding velocity v max.:5 m/s; |
| ISOSTATIC EP-061014 Sleeve Bearings | Basic Dynamic Radial Load Rating C:5400 N; Fillet Radius rb:0.30 mm; Oil Speed Rating n2:36000 rpm; Basic Static Radial Load Rating Co:2750 N; d:10.000 mm; Grease Speed Rating n1:28000 rpm; Fillet Radius ra:0.64 mm; D:30.0000 mm; B:9.00 mm; |
| ISOSTATIC CB-2436-24 Sleeve Bearings | B:30.20 mm; D:80.0000 mm; Grease Speed Rating n1:5600 rpm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:49500 N; Basic Static Radial Load Rating Co:49000 N; d:40.000 mm; Sealed Speed Rating n3:5600 rpm; Oil Speed Rating n2:7500 rpm; Accessories:Two Seals & Snap-Rin; |
| ISOSTATIC CB-2836-32 Sleeve Bearings | Sleeve:S 24x4.1/16; Threads per inch:12; d1:103.188 mm; Lock nut:AN 24; B:20.904 mm; Hydraulic nut:HMVC 24E; d:120 mm; G:119.786 mm; Mass adapter sleeve assembly:3 kg; Lock washer:W 24; |
| ISOSTATIC EP-040510 Sleeve Bearings | Oil Speed Rating n2:3800 rpm; Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:168000 N; B:45.00 mm; D:200.0000 mm; d:95.000 mm; Basic Static Radial Load Rating Co:150000 N; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:2800 rpm; |
ISOSTATIC ST-1628-6 Sleeve Bearings Video
ST-1628-6 - ISOSTATIC | Sleeve Bearings | BDI USA
1/2" Nominal Bore; 7/8" Nominal Outside Diameter; 3/16" Length Thru Bore; Thrust Washer Profile; Oil Impregnated Sintered Bronze; SAE841 Material; ...
ISOSTATIC ST-1628-6 Sleeve Bearings - NTN 6205llu Bearing
Request A Quote For Your Special 6 RoHS ISOSTATIC ST-1628-6 Sleeve Bearings Needs Today! Free Sleeve Bearings Deep Groove Ball Bea Bearing Used Quotes.
ST-1628-6 ISO | Isostatic 402413 - CBT Company
Specifications ; Inner Diameter: 1/2 in ; Material: Powdered Metal / Oil Impregnated Bronze ; Material STD: SAE 841 ; Measuring Units: Inch ; Outer Diameter: 7/8 in.
Isostatic 402413 | Apex Industrial Automation
Part / Catalog # ST-1628-6 · Manufacturer: Isostatic · UPC: 00846802050214 · Weight: 0.0172 LB · Description: OIL IMPREGNATED BRONZE THRUST WASHER SAE 841 INCH EACH ...
Powdered Metal Thrust Washers - Isostatic Industries
ST-1628-6. 1/2 X 1 NOMINAL .502. 1.004. 1/16. 202406. EW081601. 3/32. 202430. EW081601.5. 1/8. 202407. EW081602. (TW-25). (TW-31). (TW-37). (TW-38). (TW-43).
Symmco Inc. | ST-1628-6 | SAE 841 Sintered Bronze Oil ...
Shop Symmco Inc. ST-1628-6 at Applied.com, which includes; 1/2" ID x 7/8" OD x 3/16" Thick Bronze - Oil Impregnated (SAE 841) Washer.Material: Bronze – Oil Impregnated (SAE 841)Actual O.D: 0.875$2.37Missing: ISOSTATIC | Must include: ISOSTATIC
ISOSTATIC ST-1628-6 Sleeve Bearings - NSK lh45 Bearing
ISOSTATIC ST-1628-6 Sleeve Bearings ; material:: Steel ; finish/coating:: Uncoated ; manufacturer upc number:: 053893304588 ; single or double cup:: Single Cup ; D: ...
ISOSTATIC INDUSTRIES ST-1628-6 - PACK OF 9 - THRUST ...
This is a new item in Automation Recovery Packaging. The item may have been opened but has not been used. Your Price: $4.00. Quantity In Stock: 1. Qty ...