| AMI UEPPL205-16MZ20W Pillow Block Bearings | Basic dynamic load rating C:35.1 kN; Basic static load rating C0:19 kN; Mass bearing:0.45 kg; ra max.:1.5 mm; d2 ≈:45.92 mm; D2 ≈:70.2 mm; B:21 mm; da max.:45.6 mm; da min.:44 mm; Calculation factor f0:13.1; |
| AMI UCF205-14C4HR23 Flange Block Bearings | db:222.25 mm; H:419.1 mm; Taconite seal (db shaft position):TER 175; Max. speed for Taconite seal:350 r/min; Cap bolt:1 1/4-7 UNC; Cap bolt recommended tightening torque:2467.6 N·m; Pa:145 kN; Initial grease fill:2154.6 g; Mass pillow block:254 kg; H2:85.725 mm; |
| AMI UCCJO310-31 Flange Block Bearings | Mass bearing unit:0.23 kg; Recommended diameter for attachment bolts, inch G:0.375 in; L:60.5 mm; Thread grub screw G2:M6x0.75; Fatigue load limit Pu:0.28 kN; d:20 mm; A3:3.2 mm; Bearing:YARAG 204; H:112 mm; Recommended diameter for attachment bolts, mm G:10 mm; |
| AMI UCLP204C Pillow Block Bearings | Calculation factor Y0:0.8; d:82.55 mm; Basic dynamic load rating C:227 kN; Ca min.:5 mm; Basic static load rating C0:280 kN; Limiting speed:4500 r/min; B:36.098 mm; da max.:94 mm; Reference speed:3800 r/min; Da max.:127.5 mm; |
| AMI KHFT211-32 Flange Block Bearings | Comparative radial load rating CF:1370 kN; Fatigue load limit Pu:880 kN; D1 ≈:465 mm; T:323.5 mm; d1 ≈:378 mm; Thrust factor K:2.01; Mass bearing:245 kg; Calculation factor e:0.3; Basic dynamic load rating C:5230 kN; B:323.5 mm; |
| AMI KHPFT204-12 Flange Block Bearings | Preload class B GB:120 N; a:14.8 mm; Da max.:63.4 mm; Static axial stiffness, preload class C:69 N/µm; Calculation factor f2C:1.05; Calculation factor f2D:1.09; Basic static load rating C0:11 kN; da min.:44.6 mm; Preload class A GA:60 N; D:68 mm; |
| AMI UC210-31RT Insert Bearings Spherical OD | Basic Dynamic Radial Load Rating C:19500 N; B:15.00 mm; d:40.000 mm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:14600 N; Fillet Radius rb:0.30 mm; Grease Speed Rating n1:9500 rpm; D:68.0000 mm; Oil Speed Rating n2:12000 rpm; |
| AMI UEFX204TC Mounted Units & Inserts | ba:40.481 mm; h:38.1 mm; Initial grease fill:141.75 g; J min.:263.525 mm; P180°:58.7 kN; Bearing:22218 EK; R1:60.325 mm; P120°:53.4 kN; Da:160 mm; H2:41.275 mm; |
| AMI UCFA211 Flange Block Bearings | Labyrinth ring:2 x LOR 141; da:152.4 mm; Stabilizing ring:2 x SR-0-24; Cap bolt recommended tightening torque:400 N·m; Housing:SAF 034 KA; Adapter sleeve assembly:SNW 3034x6; P90°:149 kN; End plug (suffix Y):EPR 18; PG:1/4 NPT; P150°:85.9 kN; |
| AMI KHFT210 Flange Block Bearings | Basic Static Radial Load Rating Co:6000 N; B:12.00 mm; Accessories:One Shield & Snap-Ri; Oil Speed Rating Open/Shielded n2:17000 rpm; Basic Dynamic Radial Load Rating C:8970 N; D:40.0000 mm; d:17.000 mm; Fillet Radius ra:0.64 mm; Grease Speed Rating Open/Shielded n1:14000 rpm; |
| AMI MUCNFL205-14W Flange Block Bearings | Basic Dynamic Radial Load Rating C:10600 N; d:10.000 mm; D:35.0000 mm; Oil Speed Rating n2:20000 rpm; Accessories:Two Shields & Snap-R; Fillet Radius ra:0.64 mm; Basic Static Radial Load Rating Co:6100 N; Grease Speed Rating n1:15000 rpm; B:19.1 mm; Sealed Speed Rating n3:15000 rpm; |
| AMI UCFCS208-24TC Flange Block Bearings | Mass bearing:27.7 kg; Fatigue load limit Pu:116 kN; Basic dynamic load rating C:660 kN; Maximum static radial loads F0r max.:640 kN; Maximum dynamic radial loads Fr max.:450 kN; D1 ≈:145 mm; Basic static load rating C0:980 kN; C:120 mm; d:100 mm; B:120 mm; |
| AMI UENST206-19 Mounted Units & Inserts | C:620 mm; D:960 mm; Basic dynamic load rating C:15400 kN; B:620 mm; b:22.3 mm; r1,2 min.:20 mm; Design variant/feature:BC4.10/W33WI; r3,4 min.:3 mm; F:790 mm; Basic static load rating C0:45000 kN; |
| AMI UCFL206-18CE Flange Block Bearings | Bearing designation:6213 ; Weight:0.997 kg; da:72 min; Dynamic (Cr):57.210 kN; d:65 mm; Da:111 max; D:120 mm; B:23 mm; Oil:6 300 min-1; Pu:1.819 kN; |