| AMI UCCJO310-31 Flange Block Bearings | Mass bearing unit:0.23 kg; Recommended diameter for attachment bolts, inch G:0.375 in; L:60.5 mm; Thread grub screw G2:M6x0.75; Fatigue load limit Pu:0.28 kN; d:20 mm; A3:3.2 mm; Bearing:YARAG 204; H:112 mm; Recommended diameter for attachment bolts, mm G:10 mm; |
| AMI UCF205-14C4HR23 Flange Block Bearings | db:222.25 mm; H:419.1 mm; Taconite seal (db shaft position):TER 175; Max. speed for Taconite seal:350 r/min; Cap bolt:1 1/4-7 UNC; Cap bolt recommended tightening torque:2467.6 N·m; Pa:145 kN; Initial grease fill:2154.6 g; Mass pillow block:254 kg; H2:85.725 mm; |
| AMI UENST206-19 Mounted Units & Inserts | C:620 mm; D:960 mm; Basic dynamic load rating C:15400 kN; B:620 mm; b:22.3 mm; r1,2 min.:20 mm; Design variant/feature:BC4.10/W33WI; r3,4 min.:3 mm; F:790 mm; Basic static load rating C0:45000 kN; |
| AMI BNFL7-23MZ2CB Flange Block Bearings | Basic Static Radial Load Rating Co:64000 N; B:47.60 mm; Accessories:Two Shields & Snap-R; D:110.0000 mm; Grease Speed Rating n1:4000 rpm; Oil Speed Rating n2:5300 rpm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:4000 rpm; Basic Dynamic Radial Load Rating C:85200 N; d:50.000 mm; |
| AMI MUCFCS210-30NP Flange Block Bearings | d:95.000 mm; Basic Dynamic Radial Load Rating C:276000 N; B:90.00 mm; Fillet Radius rb:1.00 mm; Fillet Radius ra:2.50 mm; Basic Static Radial Load Rating Co:300000 N; Oil Speed Rating n2:3000 rpm; D:200.0000 mm; Grease Speed Rating n1:2000 rpm; |
| AMI UCECH207NPMZ2RF Hanger Unit Bearings | Lock nut:N 056; Hydraulic nut:HMVC 56E; Locking plate:PL 56; Sleeve:S 3256x10.7/16; B5:47.092 mm; Threads per inch:6; G:279.502 mm; d3 max.:330.327 mm; B1:227 mm; Mass adapter sleeve assembly:27 kg; |
| AMI UCTB211-35NP Mounted Units & Inserts | Oil Speed Rating n2:8000 rpm; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:6000 rpm; Basic Dynamic Radial Load Rating C:37700 N; B:30.20 mm; D:72.0000 mm; Grease Speed Rating n1:6000 rpm; Accessories:No Shield, no Seal; d:35.000 mm; Basic Static Radial Load Rating Co:27500 N; |
| AMI MUCFL206-20NP Flange Block Bearings | Ca:55.804 mm; Initial grease fill:181.44 g; Adapter sleeve assembly:SNW 3024x4.3/16; Labyrinth ring:2 x LOR 113; A2:155.575 mm; Appropriate attachment bolt size G:0.75 in; H2:44.45 mm; L:387.35 mm; J max.:333.375 mm; P180°:71.2 kN; |
| AMI UCHPL201-8MZ2W Hanger Unit Bearings | B:13.00 mm; Accessories:Without Accessories; Grease Speed Rating Open/Shielded n1:17000 rpm; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:12000 rpm; D:42.0000 mm; Basic Dynamic Radial Load Rating C:11400 N; Oil Speed Rating Open/Shielded n2:20000 rpm; Basic Static Radial Load Rating Co:5400 N; Grease Speed Rating n1:17000 rpm; |
| AMI BLFL6-17 Flange Block Bearings | D:72 mm; Mass bearing:0.31 kg; C:23 mm; Basic dynamic load rating C:69.5 kN; Fw:44 mm; Reference speed:10000 r/min; r1,2 min.:1.1 mm; Axial load factor Y:0.4; D1 ≈:60.2 mm; Fatigue load limit Pu:8.15 kN; |
| AMI UCMTB205-16MZ2 Pillow Block Bearings | d2:45 mm; Dynamic (Ca):57.3 kN; B:20 mm; a:17 mm; Pu:9.680 kN; Static (Coa):79.4 kN; D:75 mm; T:20 mm; r2s (min):0.3 mm; C:15.5 mm; |
| AMI UCLP204C Pillow Block Bearings | Calculation factor Y0:0.8; d:82.55 mm; Basic dynamic load rating C:227 kN; Ca min.:5 mm; Basic static load rating C0:280 kN; Limiting speed:4500 r/min; B:36.098 mm; da max.:94 mm; Reference speed:3800 r/min; Da max.:127.5 mm; |
| AMI MUCP206-19NPRF Mounted Units & Inserts | da max.:6.7 mm; ra max.:0.15 mm; Calculation factor kr:0.02; D:11 mm; Basic static load rating C0:0.143 kN; B:4 mm; r1,2 min.:0.15 mm; Basic dynamic load rating C:0.403 kN; D2 ≈:9.9 mm; d1 ≈:6.81 mm; |
| AMI UCF313-40 Flange Block Bearings | Number of balls z:21; Ball diameter Dw:7.938 mm; Da max.:75.4 mm; b:1.6 mm; Mass bearing:0.25 kg; dn:62.3 mm; Calculation factor (single, tandem) Y2:0.87; Calculation factor (back-to-back, face-to-face) X2:0.67; db min.:54.6 mm; Calculation factor f1:0.99; |