| AMI MUCST213NP Mounted Units & Inserts | P60°:423 kN; Initial grease fill:2749.95 g; P90°:254 kN; H1:241.3 mm; P150°:145 kN; PosiTrac Plus contact element:2 x B10724-167; P180°:173 kN; J max.:708.025 mm; Cap bolt recommended tightening torque:400 N·m; H:474.663 mm; |
| AMI MUCFCS210-30NP Flange Block Bearings | d:95.000 mm; Basic Dynamic Radial Load Rating C:276000 N; B:90.00 mm; Fillet Radius rb:1.00 mm; Fillet Radius ra:2.50 mm; Basic Static Radial Load Rating Co:300000 N; Oil Speed Rating n2:3000 rpm; D:200.0000 mm; Grease Speed Rating n1:2000 rpm; |
| AMI UGAKH209-27 Pillow Block Bearings | Pu:1120 kN; with cylindrical bore:1 300 min-1; rs (min):4 mm; Static (Cor):16.7 mm; D:320 mm; d:180 mm; with tapered bore:1 700 min-1; Grease:1700 kN; Oil:157.490 kN; Dynamic (Cr):9 mm; |
| AMI UCF307 Flange Block Bearings | Cap bolt recommended tightening torque:515.2 N·m; H2:50.8 mm; J1:57.15 mm; A2:174.625 mm; Initial grease fill:232.47 g; Pa:17.3 kN; RG:3/8 NPT; Da:190 mm; Adapter sleeve assembly:SNW 118x3.1/16; Ca:73.787 mm; |
| AMI UCPU307-20 Pillow Block Bearings | PG:1/4 NPT; H1:125.425 mm; h:40.922 mm; Mass pillow block:52.2 kg; P180°:72.5 kN; R2:31.75 mm; Cap bolt:5/8-11 UNC; End plug (suffix Y):EPR 15; Max. speed for Taconite seal:700 r/min; L:419.1 mm; |
| AMI UCNST206-20NP Take Up Unit Bearings | r1,2 min.:0.6 mm; D:62 mm; d:26.988 mm; Fatigue load limit Pu:0.475 kN; Basic static load rating C0:11.2 kN; C:18 mm; Basic dynamic load rating C:19.5 kN; d1 ≈:39.7 mm; B:36.5 mm; Rubber seating ring:RIS 206 A; |
| AMI UEFT210-32TC Flange Block Bearings | A1:158.75 mm; A2:225.425 mm; da:138.113 mm; Housing:SAFS 532; H:338.137 mm; J max.:488.95 mm; J min.:441.325 mm; H2:66.675 mm; Bearing:22232 CCK/W33; P180°:145 kN; |
| AMI UCECH202NPMZ2 Hanger Unit Bearings | Fillet Radius ra:1.50 mm; D:120.0000 mm; d:65.000 mm; B:38.10 mm; Basic Static Radial Load Rating Co:44000 N; Sealed Speed Rating n3:3600 rpm; Oil Speed Rating Open/Shielded n2:6300 rpm; Grease Speed Rating Open/Shielded n1:5300 rpm; Accessories:Removable Metal Shie; Basic Dynamic Radial Load Rating C:62400 N; |
| AMI UCAO314 Pillow Block Bearings | Basic Radial Load Rating-Static SCO:7310 N; Inside Diameter D:52.3875 mm; Variant:SZZX Two Seals; Adapter Sleeve AS:SNW12; Speed Rating-Single and Double Sealed Grease SDG:4000 rpm; Basic Radial Load Rating-Dynamic DC:10700 N; B:22.00 mm; Fillet Radius ra:1.50 mm; D:110.0000 mm; |
| AMI UEFT205-15NP Flange Block Bearings | Basic static load rating C0:4900 kN; Da max.:624 mm; r1,2 min.:6 mm; Reference speed:950 r/min; D1 ≈:542 mm; Limiting value e:0.3; Basic dynamic load rating C:2920 kN; s max.:16.7 mm; F:437 mm; Limiting speed:1400 r/min; |
| AMI UCLP204-12NPMZ2 Pillow Block Bearings | Basic Static Radial Load Rating Co:20400 N; Oil Speed Rating n2:12000 rpm; Basic Dynamic Radial Load Rating C:25100 N; D:52.0000 mm; Fillet Radius rb:0.60 mm; Grease Speed Rating n1:8500 rpm; Fillet Radius ra:1.00 mm; B:30.00 mm; d:25.000 mm; |
| AMI KHPFT204-12 Flange Block Bearings | Preload class B GB:120 N; a:14.8 mm; Da max.:63.4 mm; Static axial stiffness, preload class C:69 N/µm; Calculation factor f2C:1.05; Calculation factor f2D:1.09; Basic static load rating C0:11 kN; da min.:44.6 mm; Preload class A GA:60 N; D:68 mm; |
| AMI UEECH207NP Hanger Unit Bearings | Basic Dynamic Radial Load Rating C:9750 N; D:35.0000 mm; Oil Speed Rating n2:67000 rpm; B:11.00 mm; d:15.000 mm; Grease Speed Rating n1:44000 rpm; Fillet Radius ra:0.60 mm; Basic Static Radial Load Rating Co:5100 N; Fillet Radius rb:0.30 mm; |
| AMI UETM207-22NP Flange Block Bearings | Grease Speed Rating n1:24000 rpm; D:26.0000 mm; Basic Static Radial Load Rating Co:4550 N; d:10.000 mm; Basic Dynamic Radial Load Rating C:8060 N; B:16.00 mm; Fillet Radius rb:0.10 mm; Fillet Radius ra:0.30 mm; Oil Speed Rating n2:29000 rpm; |